Embroidery Library
Inspiration Studio Lookbooks Stitchers Showcase Christmas Inspiration
Videos Fabrics 101 Helpful How-To's Search Projects Projects by Category ▾
Free Designs Gift Certificates Thread Exchange Happy Hour & VIP

Stuffed Ornaments, In-the-Hoop

 

 Free project instructions to make in-the-hoop stuffed ornaments.

Free project instructions to make in-the-hoop stuffed ornaments.

Crafty ornaments are made with felt, right in the hoop, with only a few stitches done by hand. Add fiberfill stuffing for extra depth and dimension, plus gorgeous and colorful embroidery to bring a classic Christmas style to your holiday decor.
 

Project Needs & Notes

- Felt
- Tear-away stabilizer
- Temporary spray adhesive (like Gunold KK100)
- Polyester fiberfill
- 1/4" wide to 3/8" wide ribbon for hanger
- Masking tape
- Needle and thread for some hand sewing

 Designs used in this project include X11740, Christmas Dove Ornament (In-the-Hoop) design.
Find even more stuffed ornament designs here.

Special Notes: 
Use a size 11 or 75/11 sharp sewing needle, not an embroidery needle. A sharp sewing needle has a finer point than an embroidery needle, and it will make cleaner, smaller perforations in the tear-away stabilizer.

This project was featured in the following:
 Trim the Tree Lookbook
Trim the Tree Trunk Show Video
 

Free project instructions to make in-the-hoop stuffed ornaments.
In-the-hoop ornament designs have three files.

One is the full embroidery file, and the other two are dielines. The dieline files are marked with the letters DL. They're used to cut the fabric to the right shape and size.

Open the dieline files with embroidery software and print them.

If you do not have embroidery software, Wilcom's TrueSizer is
a free program to use.

Free project instructions to make in-the-hoop stuffed ornaments.
Cut out the shape and remove the paper.

Free project instructions to make in-the-hoop stuffed ornaments.
Repeat this process for the back piece, too.

Free project instructions to make in-the-hoop stuffed ornaments.
Now that the fabric pieces are cut to the proper shape and size, it's time to embroider the design.

Hoop a piece of tear-away stabilizer.

Madeira E-Zee Tear 1.5 oz. or Floriani Tearaway Medium are good choices. Those brands are more fibrous, less paper-like, and will tear more cleanly.

Free project instructions to make in-the-hoop stuffed ornaments.
Attach the hoop to the machine and load the full embroidery file (not the DL files).

 Use a size 11 or 75/11 sharp sewing needle, rather than an embroidery needle. A sharp sewing needle has a smaller, finer point than an embroidery needle, so that will make smaller perforations in the stabilizer.

Embroider the design. The first thing to sew is an outline or dieline for the front fabric piece.

Free project instructions to make in-the-hoop stuffed ornaments.
Spray the back of the front fabric piece with temporary adhesive.

Free project instructions to make in-the-hoop stuffed ornaments.
Place the fabric right inside the outline.

Free project instructions to make in-the-hoop stuffed ornaments.
Continue embroidering the design.

A tack down stitch will sew next. This holds the front fabric in place for the remainder of the design.

Free project instructions to make in-the-hoop stuffed ornaments.
All of the inside elements will sew. Follow along on the color change sheet.

On the color change sheet, look for the note that says "finishing seam." When you get to this section, remove the hoop from the machine, but do not unhoop the stabilizer.

Free project instructions to make in-the-hoop stuffed ornaments.
Cut a piece of ribbon to 8" long.

Form the ribbon into a loop and tape it in place on the backside of the back fabric piece, the center of the top edge of the fabric.

Free project instructions to make in-the-hoop stuffed ornaments.
Turn the hoop over and spray just the edges of the backside of the back fabric piece with temporary adhesive.

Place the back piece inside the shape on the back of the stabilizer.

Secure the ribbon loop in place onto the stabilizer with a piece of tape. This prevents the loop from being sewn over later on.

Free project instructions to make in-the-hoop stuffed ornaments.
The remaining steps will be seen from both sides. Wind a bobbin with the same thread used in the top.

Free project instructions to make in-the-hoop stuffed ornaments.
Attach the hoop to the machine and continue embroidering the design.

A tack down stitch will sew, binding the layers together.

Free project instructions to make in-the-hoop stuffed ornaments.
Remove the hoop from the machine, unhoop the stabilizer, and tear it away. The outline stitches will be removed with the stabilizer.

Free project instructions to make in-the-hoop stuffed ornaments.
Fill the ornament with polyester fiberfill, inserting through the opening at the bottom.

Free project instructions to make in-the-hoop stuffed ornaments.
Hand-stitch the opening closed, sewing along the original tack- down seam.

Free project instructions to make in-the-hoop stuffed ornaments.
Stitch the whole collection of crafty ornaments to adorn your holiday tree, or give as gifts for friends and family.

The beautiful embroidery and unique stuffed look add a vibrant look to any Christmas tree.

Questions or comments? Let us know! Send an email to us; the address is stitch@emblibrary.com.

Products used in this Project:
Garden Gnome Ornament (In-the-Hoop) $2.99 - $3.99

Available in 2 Sizes:

3.35" x 4.85" | 2.68" x 3.88"
Christmas Dove Ornament (In-the-Hoop) $2.99 - $3.99

Available in 2 Sizes:

5.76" x 4.83" | 3.85" x 3.23"
Christmas Tree Ornament (In-the-Hoop) $2.99 - $4.99

Available in 2 Sizes:

4.82" x 6.30" | 2.95" x 3.85"
Christmas Bell Ornament (In-the-Hoop) $2.99 - $3.99

Available in 2 Sizes:

4.83" x 5.38" | 3.45" x 3.85"